G220416 - CPSIA | Ingredients

Meguiar's Hybrid Ceramic Pre-Wax Prep, G220416, 16 Oz

Remove Paint Defects: Removes swirls and other minor paint defects without scratching
Outstanding Finish: Enhances shine, color, and paint clarity
Easy To Use: Goes on and wipes off easily
Advanced Chemistry: Contains sophisticated SiO2 Hybrid Ceramic protection
Cleans & Polishes: Removes paint defects and enhances gloss and shine at the same time
  • Clean
  • Restore
  • Shine
  • Protect
  • Maintain
  • Available in stores and online
    January 2022
     

    Meguiar's Hybrid Ceramic Pre-Wax Prep removes minor defects quickly with fine polishing agents while simultaneously feeding the paint with polishing oils, leaving the paint glossy and making colors pop! Additionally, it leaves behind a fine layer of Hybrid Ceramic protection that acts as a perfect foundation layer for Meguiar's Hybrid Ceramic paint protection products to build on! Applying and removing feels more like a wax than a traditional compound; it goes on smooth and wipes off with ease!
     

    Buy Direct
    Revive paint while enhancing color & shine

    Meguiar’s Hybrid Ceramic Pre-Wax Prep is the perfect solution for removing light blemishes and defects while adding polishing oils to enhance the depth of color and shine to your paint. It’s also part of the Hybrid Ceramic family, containing advanced SiO2 Hybrid Ceramic protection that leaves painted surfaces with extreme water beading action where water rolls right off. Hybrid Ceramic Pre-Wax Prep cleans and preps, adds shine, and leaves a foundation layer of protection behind all in one step. Then, follow with Meguiar’s Hybrid Ceramic Liquid Wax or Meguiar’s Hybrid Ceramic Spray Wax for additional long-lasting water beading protection that really takes your protection over the top! Finally, if you need to maintain your water beading protection periodically, use Meguiar’s Hybrid Ceramic Detailer to lightly fresh contaminants while enhancing protection and water beading.
     

    How to prepare the paint before applying Hybrid Ceramic Pre-Wax Prep
    • Wash and dry the vehicle first with a dedicated car wash soap, such as Meguiar’s Hybrid Ceramic Wash and Wax, which gently cleans your car’s paint, adds gloss and shine, and leaves additional protection behind each time you wash.
    • Next, run your clean, dry fingertips over the paint. If it feels rough, you have bonded contaminants on top of your paint. These contaminants can be anything from tree sap mist to industrial fallout or even road tar to paint overspray. Meguiar’s Hybrid Ceramic Quik Clay Kit comes with everything needed to safely remove bonded contaminants and leave your paint as smooth as glass.
    • Inspect the paint for below surface defects like swirls, scratches, oxidation, and water spots. Good lighting is essential here, consider inspecting paint in direct sunlight or under strong fluorescent lights. If possible, use different light sources since different types of light can reveal different below surface defects.
       
    Tips for working with Meguiar’s Hybrid Ceramic Pre-Wax Prep
    • Apply to a cool, clean surface in the shade.
    • Always apply thin and evenly. If too much product is applied, oils can build up making it streak and smear when removing.
    • Dispense a small amount of product onto a foam applicator pad.
    • Work product in thoroughly one section (max 2’ x 2’) at a time and remove immediately with a premium microfiber towel.
    • Continue process around the entire vehicle. A second application may be necessary for more neglected areas.
    • For glossy paint only, not for use on matte or satin finishes.
    • You can follow with any Meguiar’s wax after. However, use within the Hybrid Ceramic family for extreme water beading protection!
       
    Available Online